• APPROVED

    • FSII Base II - How to Find System ID

    Owned by Justin Emge
    Last updated: Feb 26, 2024 by ernie addow
    1 min read

    There is one license available in the FSII BaseII, an upgrade from 5 beltpacks to 25. If you need to upgrade to the 25 beltpack license, follow these steps:

    1. Log in to the CCM

    2. Go to DEVICE tab

    3. Under the General tab on the left, scroll down to LICENSE

    4. First thing you should see is System ID

    image-20240217-232652.png

    1. Provide the FSII Base II system ID , then ordering part # FSII-BASE-II-25BP-LICENSE (which allows you to upgrade the FSII-Base II from a 5 user system to a 25 user system

    2. Once Clear-Com process your order you will receive a licence code that you can enter (see above) .To enable 25 user mode

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.