/
FS Edge Base / Arcadia : What are the reserved IP address ranges?

FS Edge Base / Arcadia : What are the reserved IP address ranges?

Do NOT set the FSE Base station host IP address , or any of the IPTs and other end points connected to the FSE Base unit to any of these reserved IP address ranges

  • The IP addresses cannot be in the reserved range: 10.0.0.0-10.0.0.7

  • The IP addresses cannot be in the LQ tunnel range 172.23.xxx.xxx

  • The IP addresses cannot be in the localhost range 127.xxx.xxx.xxx

  • The IP addresses cannot be in the multicast range 224 .xxx.xxx.xxx to 239 .xxx.xxx.xxx

  • The static IP addresses cannot be in link local range 169.254.xxx.xxx

 

Please note it is good practice to give HOST devices like Arcadia , FSII basestations, Matrices and IPA cards fixed static IP addresses and set the end points to DHCP mode , where a DHCP server will assign them the correct IP address

Do NOT set the static IP address of the HOST devices in any of the reserved IP ranges

See FAQ (and below) for restricted IP addresses FS Edge Base / Arcadia : What are the reserved IP address ranges?

See FAQ CCM for IP Transceiver, Iris Panel or IPA Won't Allow 172.23.x.x Subnet

See FAQ LQ IP Address 172.23.xxx.xxx Restricted

See FAQ : Subnets not to be used with IPA or Iris panels

see FAQ : Arcadia: HelixNet Connection Issue Using Link Local or Restricted IPs

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.