/
Wireless: Low level audio level when connecting wireless basestation to a wired comms system

Wireless: Low level audio level when connecting wireless basestation to a wired comms system

Translate page

Question: When we link to a wired comm system, we find that the audio level going TO the wired comm units are very low, no matter what settings we use on the wireless base station.

Answer: There should be no problem interfacing a wireless basestation with a partyline comm. Be sure that you are not double terminating on the 2-wire channel. This means that you could have termination at the wireless base channel port and the wired com base port.

 

see also

Partyline: How to set the audio levels between different intercom systems to sound the same.

Wireless: Getting low level audio between a Tecpro/ ASL PL system and a DX200 basestation

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.