Wireless: Freespeak II beltpack "System Connect" display screen messaging
FS II beltpack system connect screen information:
In order to connect the beltpack to the system, the system must be visible (V) and in pairing mode (P) on the beltpack screen.
If the system is not in pairing mode, OTA (over the air registration) registration should be re-enabled.
Note:
If a beltpack is connected to a system ‘C’ will be visible in this screen.
If a beltpack is not currently connected but has been in the past ‘R’ will be visible.
This shows that the beltpack has been previously registered with the system which will recognize it.
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.