/
Wireless: FSII-BASE-II System Connection Quick Start

Wireless: FSII-BASE-II System Connection Quick Start

Just got your new intercom system?

Here is a visual overview of how you can connect the FSII-SPL and FSII-TCVR units to the FSII-BASE-II base station.

Basic connection with Ethernet Cat cabling:

Higher Resolution PDF:

For more info, visit https://www.clearcom.com/Download-Center/Knowledge-Centers/FreeSpeak-II-Knowledge-Center

 

Using SFP? See these articles and example:

  1. Wireless: What type of SFP does the new FSII-SPL (splitter use)

  2. SFPs (Fibre Transceiver) for Clear-Com products

  3. Wireless: How to calculate the antenna cable length compensation value when using FSII-SPL splitter

  4. Take note to set the DIP Switches on the FSII-SPL

  5. Connection example: see Orange connection line

     

  6. On the FSII-BASE-II, be sure to select the appropriate TCVR Port types from front panel menu:

Menu > Station Settings > TCVR Port > Ant 1 / Ant 2 > RJ45 / Fiber

  1. Or via the CCM accessible from the base station’s IP address and browse to:

 

For more info, visit https://www.clearcom.com/Download-Center/Knowledge-Centers/FreeSpeak-II-Knowledge-Center

 

 Related articles

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.