We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!

Clear-Com Solution Finder Home

Solution Finder

All content
Space settings

Clear-Com Main Website
Clear-Com Main Website
This trigger is hidden
Contact Clear-Com
Contact Clear-Com
This trigger is hidden
How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden

Results will update as you type.

•
What is the WH200/210/300 part number for the replacement battery?
•
What is the wireless headset that goes with DX410?
•
WHat is Z-Sync for Tempest and why do I need it?
•
What kind of antenna connectors are on CEL-TAs? (SMA connector)
•
Where do we send our Tempest products for repair services?
•
Why can't I clone a role in my FSII GUI? message says: "FAILED to duplicate role. Validation Error: Should match exactly one schema in oneOF"
•
Will the BP300 work with a DX210.
•
Powering a FSII Splitter or Transceiver (TCVR) with a Battery
•
IP Transceiver Bandwidth Requirements
•
Can I run IPTs at 1ms PTP packet size
•
Can I connect a FSII-BASE-II to a RM-704
•
How to see how many BPs a FSII-Base-II is currently licensed for (FSII-BASE-II-5 or FSII-BASE-II).
•
FSII BASE II CCM showing local error against antenna
•
How do I wire a footswitch to FS Edge basestation
•
Radar scanning in DFS channels
•
Freespeak Edge Transceiver Power
•
Upgrading IPT antennas by USB
•
FS Edge Base / Arcadia : What are the reserved IP address ranges?
•
Changing the DX base station from dual-channel mode to single-channel mode.
•
FreeSpeak II RSSI meaning
•
Free Speak-II: Does FS-II create any interference with a DAS system?
•
Wireless: FSII-BP Master Volume keeps resetting to -70dB on FSII-BASE
EQUIP
•
What do the status LEDS on my FSII SPL ( splitter) mean
•
PTP clock parameters on AES67 port of FSE/ARCADIA
•
IP-Transceiver – Ubiquiti Transport with SFP Grand Master PTP Clock
•
DX: EB340 user guide
FS EDGE BASE: How do I program the IP on the Base using the front panel menus?
•
Edge Transceiver: Configure Standalone Mode Parameters
•
IP-Transceiver IP Reverting to DHCP
•
What size / type is a FSII-BP beltclip screw?
•
Service: AC60 spare parts
•
Service: FSII Base II spare parts
•
Service: FSII BP 19 spare parts
•
Equip - Transceiver LED Status Description
•
FSII Edge Transceivers exclamation mark displays icon
•
What is the PoE Class / power consumption of Edge Transceivers
•
FSII-BP19-X4-O2 showing "CHARGE ERROR"
•
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
•
Wireless: DX210 'ISO' button on packs not working.
•
Wireless: BP210 / WH210 programming "Special Settings"
•
Wireless: Iso function not working on BP210 unit
•
IPTs with single SFP for fibre
•
Wireless: Can I access FSII beltpack firmware, serial # and DECT Band info from a BP?
•
Wireless: Low level audio level when connecting wireless basestation to a wired comms system
•
Wireless: Are there any limitations as to how long a FSII beltpack can stay on a FSII transceiver antenna?
•
Wireless: FreeSpeak: How do I avoid configuring eavesdropping on an Eclipse-HX FSII beltpack
•
FSII-BASE-II: 4W Noise/Buzz/Ground Hum
•
IP-Transceiver (IPT) Lights - What Do They Mean?
•
Why can't I latch a FS-II beltpack role key on my panel when calling it?
•
Service: FSII TCVR-IP spare parts
•
Wireless: Can I link two DX210 basestations to together and roam between them?
•
Linking DX210 base stations over distance
•
Wireless: What happens if I link the audio on two DX210 base stations together?
•
Wireless: How to connect the audio between two DX210 basestations
•
Wireless: Can I use RS703 directly with FSII-BASE-II?
•
Wireless: Can I use RTS BP325 with FSII BASE II?
•
Wireless: Can I interface an MS-232 party-line main station to a Telex BTR-800 wireless base station?
•
Wireless: How do i upgrade the firmware for the FSII-TCVR and FSII-BP via the FSII-BASE-II?
•
Wireless: How do I put a FS-II antenna into "Site Survey" mode
Wireless: FSII-BP-19 Bluetooth - Compatible Headsets
•
Wireless: FreeSpeak II (FSII) wireless battery BAT60 Material safety data sheet (MSDS)
•
Wireless: FSII-BASE-II System Connection Quick Start
•
FreeSpeak II Base & Arcadia E1 Switch Over
•
FSII Antenna (E1 , IP) Mic Stand nut spare part
•
FreeSpeak Edge Antenna Connection Type
•
FSII: How to switch IPT in standalone mode for Site Survey
•
Wireless: FSII BP worldwide approval (date Aug 2016)
•
FSII Base II - How to Find System ID
•
DX : Can a BP200 work on IC2 on a BS210?
•
WALKIE TALKIE TO FREESPEAK II BASE-II CONFIGURATION VIA CCM
•
Service : What is the spare part # for the EQUIP power connector.
•
Can I use FSII US/Canada beltpacs & transceivers in Europe?
•
Wireless: What are the basics of DECT
•
Wireless: Can I combine DX210 antennas with other non 2.4 GHz antenna systems?
•
Wireless: General declaration of BATxx 30% battery charge when leaving the factory
•
FSII Transceiver Power Levels
•
FSII BP: what does the (i) mean in the BT version
•
Wireless: Can the FSII BP beltpack be powered and operated continuously via its USB port.
•
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
•
FreeSpeak Edge™IP天线快速入门指南
•
FreeSpeak Edge™ 无线腰包快速入门指南
•
FreeSpeakII_腰包_蓝牙功能_快速应用指南
•
wireless : What is the compatibility of DX EU products?
•
Wireless: Can I extend / remote the antennas on the DX-210 base station?
•
FSII-BASE-II Firmware Update Guide
•
Wireless: What type of SFP does the new FSII-SPL (splitter use)
•
Wireless: Freespeak II beltpack "System Connect" display screen messaging
•
Wireless: What is the Radiation Polar Pattern for an FSII Transceiver?
•
Wireless: FS II transceiver antenna coverage capabilities / expectations
•
Wireless: FSII Base II connected to 3rd party matrix causing audio feedback

Solution Finder

/

Wireless Solutions (FSII/DX/Edge/Equip)

/

FreeSpeak Edge™IP天线快速入门指南

APPROVED

FreeSpeak Edge™IP天线快速入门指南

Owned by jason.hao, created

Last updated: Aug 11, 2024 by ernie addow

1 min read

Loading data...