We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!

Custom logoCustom icon
Clear-Com Solution Finder Home
Templates

Solution Finder

  • All content
  • Space settings
  • Clear-Com Main Website
    Clear-Com Main Website
     This trigger is hidden
  • Contact Clear-Com
    Contact Clear-Com
     This trigger is hidden
  • How-to articles
    How-to articles
     This trigger is hidden
  • Troubleshooting articles
    Troubleshooting articles
     This trigger is hidden
Results will update as you type.
  • •
    Tempest Tip of the Week - Version 2.0 is here!
  • •
    Tempest: Do the 4-Wire RJ-45 connectors on the Tempest base provide Matrix port handshake?
  • •
    Tempest: How does the Tempest Beltpack battery indicator screen work?
  • •
    Tempest: Why can't I hear the audio between two Tempest 2400 bases connected together via Accu-Sync?
  • •
    Tempest: Why do I hear a echo in my Tempest beltpack headset when I connect my Clear-Com to a wired PL system?
  • •
    Tempest: How far can I remote the antennas from a tempest basestation
  • •
    Term: CellCom / Freespeak terminology
  • •
    Upgrading FSII BP Firmware Over-the-Air is Not Working Using v106 App Code
  • •
    We are using the DX200 for a wireless intercom. Now we need to chain two stations for more belt packs. Can we use the primary station as an intercom for all 30 belt packs?
  • •
    We purchased a DX210 system. We were wondering if there was any way of being able to have more than 3 people connect to the station while in 2-channel mode.
  • •
    What antennas can be used with the older WTR-680/C6 system?
  • •
    WHAT ARE THE ANTENNA PART NUMBERS FOR THE WBS-680/B4?
  • •
    WHAT ARE THE ANTENNA PART NUMBERS FOR THE WTR-680/B4?
  • •
    WHAT ARE THE ANTENNA PART NUMBERS FOR WBS-680/A2?
  • •
    What are the antenna part numbers for WTR-680/A2?
  • •
    What are the FCC ID for the FreeSpeak II Belt Pack and Transceiver and their output wattage?
  • •
    What are the replacement for the Tempest Products since Clearcom discontinued selling?
  • •
    What are the replacement products for Tempest?
  • •
    What are the specs for the CCT-DAKIT1 Tempest directional antenna?
  • •
    What are the three levels of loudness in the CEL-BP / FS-BP Headset options menu
  • •
    What do the LED indications on an Edge Transceiver mean?
  • •
    What do the various IP-antenna (transceiver) LED status mean?
  • •
    What do the yellow bars in EHX's FSII Wireless Status Page mean?
  • •
    What Emission Class is the Tempest 2.4GHz system rated at?
  • •
    WHAT IS PART NUMBER FOR CHARGER THAT WORKS WITH THE FSI?
  • •
    What is the battery for BP200 and what is the price?
  • •
    What is the battery for BP410 beltpack and it's price?
  • •
    What is the Country of Origin and HTS tariff code for FSII-BASE?
  • •
    What is the country of origin for FSII-TCVR-19-EU?
  • What is the difference between the FSII Base II event log and snapshot
  • •
    What is the FSII Base 2 and LQ processor board part numbers?
  • •
    What is the part number for the DX200 knob
  • •
    WHAT IS THE PART NUMBER FOR THE FSII CHARGER?
  • •
    what is the part number for the power jack for a AC40A?
  • •
    What is the part number for the rechargeable battery pack on an Analog Wireless Beltpack?
  • •
    What is the part# for the antenna for BS200 & BS210 and it's price?
  • •
    What is the power supply for DX200 system?
  • •
    WHAT IS THE REPLACEMENT FOR THE CELLCOM-BASE?
  • •
    What is the transmit antenna for the WBS-670/680 A2?
  • •
    What is the tuning range of the PRO850?
  • •
    What is the UN Number for BAT850 NiMH battery?
  • •
    What is the WH200/210/300 part number for the replacement battery?
  • •
    What is the wireless headset that goes with DX410?
  • •
    WHat is Z-Sync for Tempest and why do I need it?
  • •
    What kind of antenna connectors are on CEL-TAs? (SMA connector)
  • •
    Where do we send our Tempest products for repair services?
  • •
    Why can't I clone a role in my FSII GUI? message says: "FAILED to duplicate role. Validation Error: Should match exactly one schema in oneOF"
  • •
    Will the BP300 work with a DX210.
  • •
    Powering a FSII Splitter or Transceiver (TCVR) with a Battery
  • •
    IP Transceiver Bandwidth Requirements
  • •
    Can I run IPTs at 1ms PTP packet size
  • •
    Can I connect a FSII-BASE-II to a RM-704
  • •
    How to see how many BPs a FSII-Base-II is currently licensed for (FSII-BASE-II-5 or FSII-BASE-II).
  • •
    FSII BASE II CCM showing local error against antenna
  • •
    How do I wire a footswitch to FS Edge basestation
  • •
    Radar scanning in DFS channels
  • •
    Freespeak Edge Transceiver Power
  • •
    Upgrading IPT antennas by USB
  • •
    FS Edge Base / Arcadia : What are the reserved IP address ranges?
  • •
    Changing the DX base station from dual-channel mode to single-channel mode.
  • •
    FreeSpeak II RSSI meaning
  • •
    Free Speak-II: Does FS-II create any interference with a DAS system?
  • •
    Wireless: FSII-BP Master Volume keeps resetting to -70dB on FSII-BASE
  • EQUIP
  • •
    What do the status LEDS on my FSII SPL ( splitter) mean
  • •
    PTP clock parameters on AES67 port of FSE/ARCADIA
  • •
    IP-Transceiver – Ubiquiti Transport with SFP Grand Master PTP Clock
  • •
    DX: EB340 user guide
  • FS EDGE BASE: How do I program the IP on the Base using the front panel menus?
  • •
    Edge Transceiver: Configure Standalone Mode Parameters
  • •
    IP-Transceiver IP Reverting to DHCP
  • •
    What size / type is a FSII-BP beltclip screw?
  • •
    Service: AC60 spare parts
  • •
    Service: FSII Base II spare parts
  • •
    Service: FSII BP 19 spare parts
  • •
    Equip - Transceiver LED Status Description
  • •
    FSII Edge Transceivers exclamation mark displays icon
  • •
    What is the PoE Class / power consumption of Edge Transceivers
  • •
    FSII-BP19-X4-O2 showing "CHARGE ERROR"
  • •
    WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
  • •
    Wireless: DX210 'ISO' button on packs not working.
  • •
    Wireless: BP210 / WH210 programming "Special Settings"
  • •
    Wireless: Iso function not working on BP210 unit
  • •
    IPTs with single SFP for fibre
  • •
    Wireless: Can I access FSII beltpack firmware, serial # and DECT Band info from a BP?
  • •
    Wireless: Low level audio level when connecting wireless basestation to a wired comms system
  • •
    Wireless: Are there any limitations as to how long a FSII beltpack can stay on a FSII transceiver antenna?
  • •
    Wireless: FreeSpeak: How do I avoid configuring eavesdropping on an Eclipse-HX FSII beltpack
  • •
    FSII-BASE-II: 4W Noise/Buzz/Ground Hum
  • •
    IP-Transceiver (IPT) Lights - What Do They Mean?
  • •
    Why can't I latch a FS-II beltpack role key on my panel when calling it?
  • •
    Service: FSII TCVR-IP spare parts
  • •
    Wireless: Can I link two DX210 basestations to together and roam between them?
  • •
    Linking DX210 base stations over distance
  • •
    Wireless: What happens if I link the audio on two DX210 base stations together?
  • •
    Wireless: How to connect the audio between two DX210 basestations
  • •
    Wireless: Can I use RS703 directly with FSII-BASE-II?
  • •
    Wireless: Can I use RTS BP325 with FSII BASE II?
  • •
    Wireless: Can I interface an MS-232 party-line main station to a Telex BTR-800 wireless base station?
  • •
    Wireless: How do i upgrade the firmware for the FSII-TCVR and FSII-BP via the FSII-BASE-II?
  • •
    Wireless: How do I put a FS-II antenna into "Site Survey" mode
  • Wireless: FSII-BP-19 Bluetooth - Compatible Headsets
  • •
    Wireless: FreeSpeak II (FSII) wireless battery BAT60 Material safety data sheet (MSDS)
  • •
    Wireless: FSII-BASE-II System Connection Quick Start
  • •
    FreeSpeak II Base & Arcadia E1 Switch Over
  • •
    FSII Antenna (E1 , IP) Mic Stand nut spare part
  • •
    FreeSpeak Edge Antenna Connection Type
  • •
    FSII: How to switch IPT in standalone mode for Site Survey
  • •
    Wireless: FSII BP worldwide approval (date Aug 2016)
  • •
    FSII Base II - How to Find System ID
  • •
    DX : Can a BP200 work on IC2 on a BS210?
  • •
    WALKIE TALKIE TO FREESPEAK II BASE-II CONFIGURATION VIA CCM
  • •
    Service : What is the spare part # for the EQUIP power connector.