/
FSII: How to switch IPT in standalone mode for Site Survey

FSII: How to switch IPT in standalone mode for Site Survey

  • APPROVED

    • Steps:

    1. Power IPT with PSU (local power or portable battery) or PoE by pressing Mode button

    2. When LEDs are Amber, let go of mode button & wait few moments (about 2min)

    3. Status LED 1 Solid Amber, Status LED 2 Flashing Amber - IPT is ready for pairing (time out 2 min)

    4. Power up 2 x FSII-BP. Go to Menu > System Connect > select IPT ID with “V” (Visible) & “P” (pairing mode)

    5. FSII-BPs should be paired and ready for site survey walk test.

    Remember! wear headsets and listen to the audio quality during walk test. and look at the Site survey menu for references:

     

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.