We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!

Clear-Com Solution Finder Home

Solution Finder

All content
Space settings

Clear-Com Main Website
Clear-Com Main Website
This trigger is hidden
Contact Clear-Com
Contact Clear-Com
This trigger is hidden
How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden

Results will update as you type.

•
I can't register my beltpacks to the DX210 base
•
I cannot find a DX product on my pricesheet
•
I have an existing DX210 system, can I attach a mic and speaker to it?
•
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
•
In a multiple BS200 (DX200) station setup, can beltpacs transition from one base station to the other, like a cell tower/phone system?
•
Independent audio program Input control for FSII beltpack
•
Information: Practical Wireless Spectrum Overview for EMEA and US
•
IPT: When trying to access an IP antenna's browser, sometimes the message "Not Found" is displayed.
•
Is the WBS-670/680 and the WTR-670/680 available in the C3 band?
•
Is the WBS-670/680 and the WTR-670/680 available in the C6 band?
•
Is the WTR-670/680 -C6 band available in the United States?
•
Is there a traveling case for the DX100 or MB300es systems?
•
My Tempest beltstation is not retaining the name changes
•
My Tempest BP does not connect to base and doesn't display the Radio Version
•
Other: Does Clear-Com still repair the HME 800 wireless system
•
PA: Registering a Secondary DX-series base station to a Primary
•
Power supply info for Pro850 battery charger
•
Proper charging of the BAT850 Rechargeable Battery
•
PTX-3 - I am trying to unlock the PTX-3 IFB transmitter and can not find in a manual how to unlock the PTX-3
•
Service: PD4007 CellCom/Freespeak programming cable
•
Service: What is the part number for the replacement FSII BP and Helixnet II BP beltclip
•
Service: What is the pin out for the FreeSpeak registraion cable
•
T Desk will not connect to Tempest BaseStation
•
Tempest 2 Channel Dual Listen Mode (Steve Sandford)
•
Tempest Antenna Placement
•
Tempest Belt Station Wireless Iso (Steve Sandford)
•
Tempest Belt Stations Manual Switching Between Base Stations (Steve Sandford)
•
Tempest Nulling and ECAN / Echo Procedure for 2 Wire Party Line Interface
•
Tempest Tip of the Week - Spilt Mode
•
Tempest Tip of the Week - Tempest and WiFi.
•
Tempest Tip of the Week - Unlimited Wireless Belt Stations
•
Tempest Tip of the Week - Version 2.0 is here!
•
Tempest: Do the 4-Wire RJ-45 connectors on the Tempest base provide Matrix port handshake?
•
Tempest: How does the Tempest Beltpack battery indicator screen work?
•
Tempest: Why can't I hear the audio between two Tempest 2400 bases connected together via Accu-Sync?
•
Tempest: Why do I hear a echo in my Tempest beltpack headset when I connect my Clear-Com to a wired PL system?
•
Tempest: How far can I remote the antennas from a tempest basestation
•
Term: CellCom / Freespeak terminology
•
Upgrading FSII BP Firmware Over-the-Air is Not Working Using v106 App Code
•
We are using the DX200 for a wireless intercom. Now we need to chain two stations for more belt packs. Can we use the primary station as an intercom for all 30 belt packs?
•
We purchased a DX210 system. We were wondering if there was any way of being able to have more than 3 people connect to the station while in 2-channel mode.
•
What antennas can be used with the older WTR-680/C6 system?
•
WHAT ARE THE ANTENNA PART NUMBERS FOR THE WBS-680/B4?
•
WHAT ARE THE ANTENNA PART NUMBERS FOR THE WTR-680/B4?
•
WHAT ARE THE ANTENNA PART NUMBERS FOR WBS-680/A2?
•
What are the antenna part numbers for WTR-680/A2?
•
What are the FCC ID for the FreeSpeak II Belt Pack and Transceiver and their output wattage?
•
What are the replacement for the Tempest Products since Clearcom discontinued selling?
•
What are the replacement products for Tempest?
•
What are the specs for the CCT-DAKIT1 Tempest directional antenna?
•
What are the three levels of loudness in the CEL-BP / FS-BP Headset options menu
•
What do the LED indications on an Edge Transceiver mean?
•
What do the various IP-antenna (transceiver) LED status mean?
•
What do the yellow bars in EHX's FSII Wireless Status Page mean?
•
What Emission Class is the Tempest 2.4GHz system rated at?
•
WHAT IS PART NUMBER FOR CHARGER THAT WORKS WITH THE FSI?
•
What is the battery for BP200 and what is the price?
•
What is the battery for BP410 beltpack and it's price?
•
What is the Country of Origin and HTS tariff code for FSII-BASE?
•
What is the country of origin for FSII-TCVR-19-EU?
What is the difference between the FSII Base II event log and snapshot
•
What is the FSII Base 2 and LQ processor board part numbers?
•
What is the part number for the DX200 knob
•
WHAT IS THE PART NUMBER FOR THE FSII CHARGER?
•
what is the part number for the power jack for a AC40A?
•
What is the part number for the rechargeable battery pack on an Analog Wireless Beltpack?
•
What is the part# for the antenna for BS200 & BS210 and it's price?
•
What is the power supply for DX200 system?
•
WHAT IS THE REPLACEMENT FOR THE CELLCOM-BASE?
•
What is the transmit antenna for the WBS-670/680 A2?
•
What is the tuning range of the PRO850?
•
What is the UN Number for BAT850 NiMH battery?
•
What is the WH200/210/300 part number for the replacement battery?
•
What is the wireless headset that goes with DX410?
•
WHat is Z-Sync for Tempest and why do I need it?
•
What kind of antenna connectors are on CEL-TAs? (SMA connector)
•
Where do we send our Tempest products for repair services?
•
Why can't I clone a role in my FSII GUI? message says: "FAILED to duplicate role. Validation Error: Should match exactly one schema in oneOF"
•
Will the BP300 work with a DX210.
•
Powering a FSII Splitter or Transceiver (TCVR) with a Battery
•
IP Transceiver Bandwidth Requirements
•
Can I run IPTs at 1ms PTP packet size
•
Can I connect a FSII-BASE-II to a RM-704
•
How to see how many BPs a FSII-Base-II is currently licensed for (FSII-BASE-II-5 or FSII-BASE-II).
•
FSII BASE II CCM showing local error against antenna
•
How do I wire a footswitch to FS Edge basestation
•
Radar scanning in DFS channels
•
Freespeak Edge Transceiver Power
•
Upgrading IPT antennas by USB
•
FS Edge Base / Arcadia : What are the reserved IP address ranges?
•
Changing the DX base station from dual-channel mode to single-channel mode.
•
FreeSpeak II RSSI meaning
•
Free Speak-II: Does FS-II create any interference with a DAS system?
•
Wireless: FSII-BP Master Volume keeps resetting to -70dB on FSII-BASE
EQUIP
•
What do the status LEDS on my FSII SPL ( splitter) mean
•
PTP clock parameters on AES67 port of FSE/ARCADIA
•
IP-Transceiver – Ubiquiti Transport with SFP Grand Master PTP Clock
•
DX: EB340 user guide
FS EDGE BASE: How do I program the IP on the Base using the front panel menus?
•
Edge Transceiver: Configure Standalone Mode Parameters
•
IP-Transceiver IP Reverting to DHCP
•
What size / type is a FSII-BP beltclip screw?
•
Service: AC60 spare parts
•
Service: FSII Base II spare parts
•
Service: FSII BP 19 spare parts
•
Equip - Transceiver LED Status Description
•
FSII Edge Transceivers exclamation mark displays icon
•
What is the PoE Class / power consumption of Edge Transceivers
•
FSII-BP19-X4-O2 showing "CHARGE ERROR"
•
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
•
Wireless: DX210 'ISO' button on packs not working.
•
Wireless: BP210 / WH210 programming "Special Settings"
•
Wireless: Iso function not working on BP210 unit
•
IPTs with single SFP for fibre
•
Wireless: Can I access FSII beltpack firmware, serial # and DECT Band info from a BP?
•
Wireless: Low level audio level when connecting wireless basestation to a wired comms system
•
Wireless: Are there any limitations as to how long a FSII beltpack can stay on a FSII transceiver antenna?
•
Wireless: FreeSpeak: How do I avoid configuring eavesdropping on an Eclipse-HX FSII beltpack
•
FSII-BASE-II: 4W Noise/Buzz/Ground Hum
•
IP-Transceiver (IPT) Lights - What Do They Mean?
•
Why can't I latch a FS-II beltpack role key on my panel when calling it?
•
Wireless: Can I link two DX210 basestations to together and roam between them?
•
Linking DX210 base stations over distance
•
Wireless: What happens if I link the audio on two DX210 base stations together?
•
Wireless: How to connect the audio between two DX210 basestations
•
Wireless: Can I use RS703 directly with FSII-BASE-II?
•
Wireless: Can I use RTS BP325 with FSII BASE II?
•
Wireless: Can I interface an MS-232 party-line main station to a Telex BTR-800 wireless base station?
•
Wireless: How do i upgrade the firmware for the FSII-TCVR and FSII-BP via the FSII-BASE-II?
•
Wireless: How do I put a FS-II antenna into "Site Survey" mode
Wireless: FSII-BP-19 Bluetooth - Compatible Headsets
•
Wireless: FreeSpeak II (FSII) wireless battery BAT60 Material safety data sheet (MSDS)
•
Wireless: FSII-BASE-II System Connection Quick Start
•
FreeSpeak II Base & Arcadia E1 Switch Over
•
FSII Antenna (E1 , IP) Mic Stand nut spare part
•
FreeSpeak Edge Antenna Connection Type
•
FSII: How to switch IPT in standalone mode for Site Survey
•
FSII Base II - How to Find System ID
•
DX : Can a BP200 work on IC2 on a BS210?
•
WALKIE TALKIE TO FREESPEAK II BASE-II CONFIGURATION VIA CCM
•
Service : What is the spare part # for the EQUIP power connector.
•
Can I use FSII US/Canada beltpacs & transceivers in Europe?
•
Wireless: General declaration of BATxx 30% battery charge when leaving the factory
•
FSII Transceiver Power Levels
•
FSII BP: what does the (i) mean in the BT version
•
Wireless: Can the FSII BP beltpack be powered and operated continuously via its USB port.
•
FreeSpeak Edge™IP天线快速入门指南
•
FreeSpeak Edge™ 无线腰包快速入门指南
•
FreeSpeakII_腰包_蓝牙功能_快速应用指南
•
FSII-BASE-II Firmware Update Guide

Solution Finder

/

Wireless Solutions (FSII/DX/Edge/Equip)

/

IP Transceiver Bandwidth Requirements

IP Transceiver Bandwidth Requirements

Owned by Justin Emge, created

Last updated: Oct 12, 2021 by SookFong Lau

1 min read

Loading data...