Wireless: FreeSpeak: How do I avoid configuring eavesdropping on an Eclipse-HX FSII beltpack

Unlike conventional analogue RF systems, Eclipse-HX maintains a dedicated and continuous audio stream to each of its online FreeSpeak II beltpacks even when the beltpacks are roaming from transceiver to transceiver.
In all cases, audio routing within the Eclipse-HX matrix is controlled by EHX, the systems configuration software. Typically, EHX is used to configure FreeSpeak II beltpack keys to talk and listen to Party-lines, which are then implemented within the Eclipse-HX Matrix.

It is also possible to configure point to point communications between intercom panels and Free Speak II beltpacks by assigning talk keys.

If the Eclipse-HX System administrator requires remote monitoring, any of the systems control interfaces (EHX, HCI or Production Maestro Pro) can be used to route FSII audio with or without needing a button to be pressed at the FS II beltpack itself.

The following are examples of possible ways, which the Eclipse-HX system administrator can setup remote monitoring of a FS II beltpack.

  • Use EHX/Panels screen to configure a panel with a listen key to a FS II Beltpack

  • Use EHX/Partyline screen to make a FS II a permanent talker to a Partyline

  • Use EHX/Crosspoint map screen to route a FS II Beltpack to a destination

  • Use EHX/Local Advanced Forced listen to route audio from a FS II beltpack

  • Use EHX/Routes to Route audio from a FS II beltpack

  • Use EHX/Fast Key Assignment to enable Listen assignment to FS II beltpacks

  • Use Logic Maestro to create a route from a beltpack

  • Use Production Maestro or HCI to route beltpack to a Four-wire

Key Notes

  • For remote monitoring to work, the beltpack headset microphone must not be muted locally (ref CC300 and CC 400 microphone boom switch).

  • The EHX system provides no warning to an operator that his microphone is live.

  • The Eclipse System provides no easy way to limit eavesdropping to only occur when a BP operator is pressing a Talk Key

  • Monitoring features must not be used if operators are required to know when their microphone is live.

  • This solution relates to all Eclipse-HX system software versions up to and including HX 8.5. 

Key words:
“Why is it possible to eavesdrop on an Eclipse–HX FSII beltpack?“  “How do I avoid configuring  eavesdropping on an Eclipse-HX FSII beltpack?“ “How do I configure the Eclipse-HX system to monitor an Eclipse HX FSII audio?” “How do I configure the Eclipse-HX system to monitor an Eclipse HX FSII audio, but only when the HX operator presses a talk key?”

 

From EHX V11, there is a tick box in the FSII BP roles settings to enable to disable eavesdropping for the BP, similar in operation to eavesdropping mode for V-series panels

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.