• APPROVED

    • FSII Transceiver Power Levels

    Owned by Justin Emge, created
    Last updated: Jun 02, 2024 by ernie addow
    1 min read

    On the FSII, you have the ability to change the power settings in order to adapt your system to the room. This might be done for several reasons, including events where you might have more than one FSII or 1.9 GHz DECT system installed.

    Please note that when you change the power level of a transceiver, the beltpack will also change its setting to the same power level.

    The following readings were gathered in a faraday chamber with the output measured in dBm (decibel-milliwatts).

    FSII-TCVR-IP-19-US

    Power Mode

    Low

    Medium

    High

    Transceiver

    1.45 dBm

    7.38 dBm

    21.42 dBm

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.