What is the tuning range of the PRO850? - Solution Finder

Clear-Com Solution Finder Home

Templates

Solution Finder

All content
Space settings

Clear-Com Main Website
Clear-Com Main Website
This trigger is hidden
Contact Clear-Com
Contact Clear-Com
This trigger is hidden
How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden

Results will update as you type.

How do I to find Tempest Base & Belt Firmware/Radio version Information?
How do we add an additional set of antennas for our Tempest system? Do you sell the hardware?
How does Tempest work with Wi-Fi all in the same band?
How to find which DECT (country, frequency) a CellCom or FreeSpeak I system has other than connecting to software?
How to replace the FSII BP Door (video)
How to replace the FSII BP Keypad (video)
How to set the switches to select frequency that the PRC-2 receives
How to Update a FSII BaseII Firmware/Software
I am end-user and I want to purchase AC40A battery charger. Can I purchase this from you?
I am looking for a battery for the tempest line, what is the part number?
I can't register my beltpacks to the DX210 base
I cannot find a DX product on my pricesheet
I have an existing DX210 system, can I attach a mic and speaker to it?
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
In a multiple BS200 (DX200) station setup, can beltpacs transition from one base station to the other, like a cell tower/phone system?
Independent audio program Input control for FSII beltpack
Information: Practical Wireless Spectrum Overview for EMEA and US
IPT: When trying to access an IP antenna's browser, sometimes the message "Not Found" is displayed.
Is the WBS-670/680 and the WTR-670/680 available in the C3 band?
Is the WBS-670/680 and the WTR-670/680 available in the C6 band?
Is the WTR-670/680 -C6 band available in the United States?
Is there a traveling case for the DX100 or MB300es systems?
My Tempest beltstation is not retaining the name changes
My Tempest BP does not connect to base and doesn't display the Radio Version
Other: Does Clear-Com still repair the HME 800 wireless system
PA: Registering a Secondary DX-series base station to a Primary
Power supply info for Pro850 battery charger
Proper charging of the BAT850 Rechargeable Battery
PTX-3 - I am trying to unlock the PTX-3 IFB transmitter and can not find in a manual how to unlock the PTX-3
Service: PD4007 CellCom/Freespeak programming cable
Service: What is the part number for the replacement FSII BP and Helixnet II BP beltclip
Service: What is the pin out for the FreeSpeak registraion cable
T Desk will not connect to Tempest BaseStation
Tempest 2 Channel Dual Listen Mode (Steve Sandford)
Tempest Antenna Placement
Tempest Belt Station Wireless Iso (Steve Sandford)
Tempest Belt Stations Manual Switching Between Base Stations (Steve Sandford)
Tempest Nulling and ECAN / Echo Procedure for 2 Wire Party Line Interface
Tempest Tip of the Week - Spilt Mode
Tempest Tip of the Week - Tempest and WiFi.
Tempest Tip of the Week - Unlimited Wireless Belt Stations
Tempest Tip of the Week - Version 2.0 is here!
Tempest: Do the 4-Wire RJ-45 connectors on the Tempest base provide Matrix port handshake?
Tempest: How does the Tempest Beltpack battery indicator screen work?
Tempest: Why can't I hear the audio between two Tempest 2400 bases connected together via Accu-Sync?
Tempest: Why do I hear a echo in my Tempest beltpack headset when I connect my Clear-Com to a wired PL system?
Tempest: How far can I remote the antennas from a tempest basestation
Term: CellCom / Freespeak terminology
Upgrading FSII BP Firmware Over-the-Air is Not Working Using v106 App Code
We are using the DX200 for a wireless intercom. Now we need to chain two stations for more belt packs. Can we use the primary station as an intercom for all 30 belt packs?
We purchased a DX210 system. We were wondering if there was any way of being able to have more than 3 people connect to the station while in 2-channel mode.
What antennas can be used with the older WTR-680/C6 system?
WHAT ARE THE ANTENNA PART NUMBERS FOR THE WBS-680/B4?
WHAT ARE THE ANTENNA PART NUMBERS FOR THE WTR-680/B4?
WHAT ARE THE ANTENNA PART NUMBERS FOR WBS-680/A2?
What are the antenna part numbers for WTR-680/A2?
What are the FCC ID for the FreeSpeak II Belt Pack and Transceiver and their output wattage?
What are the replacement for the Tempest Products since Clearcom discontinued selling?
What are the replacement products for Tempest?
What are the specs for the CCT-DAKIT1 Tempest directional antenna?
What are the three levels of loudness in the CEL-BP / FS-BP Headset options menu
What do the LED indications on an Edge Transceiver mean?
What do the various IP-antenna (transceiver) LED status mean?
What do the yellow bars in EHX's FSII Wireless Status Page mean?
What Emission Class is the Tempest 2.4GHz system rated at?
WHAT IS PART NUMBER FOR CHARGER THAT WORKS WITH THE FSI?
What is the battery for BP200 and what is the price?
What is the battery for BP410 beltpack and it's price?
What is the Country of Origin and HTS tariff code for FSII-BASE?
What is the country of origin for FSII-TCVR-19-EU?
What is the difference between the FSII Base II event log and snapshot
What is the FSII Base 2 and LQ processor board part numbers?
What is the part number for the DX200 knob
WHAT IS THE PART NUMBER FOR THE FSII CHARGER?
what is the part number for the power jack for a AC40A?
What is the part number for the rechargeable battery pack on an Analog Wireless Beltpack?
What is the part# for the antenna for BS200 & BS210 and it's price?
What is the power supply for DX200 system?
WHAT IS THE REPLACEMENT FOR THE CELLCOM-BASE?
What is the transmit antenna for the WBS-670/680 A2?
What is the tuning range of the PRO850?
What is the UN Number for BAT850 NiMH battery?
What is the WH200/210/300 part number for the replacement battery?
What is the wireless headset that goes with DX410?
WHat is Z-Sync for Tempest and why do I need it?
What kind of antenna connectors are on CEL-TAs? (SMA connector)