/
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL

WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL

Question: Are there any SFPs for FSII-BASE-II which allow just one fiber cable with RX/TX to FSII-SPL (Free-Speak Splitter)?
Answer:
For FSII splitter and base station you could use a single strand fiber module if you can find one that operates at 125 Mbps.  
Example:https://www.arris.com/globalassets/resources/data-sheets/87-10244-revd_tfb1550-tf17_sfp-transceiver.pdf ftp://ftp.romsat.ua/pub/Lan/AURORA/datasheets/87-10244-RevB_TFB1550-TF17_SFP-Transceiver.pdf

The above have NOT been tested by CC engineering but they do meet the specification required, Single strand fiber SFP working at 125Mbps (Fast Ethernet) 

 For the new IP transceiver (IPT) and IPA card, you should be able to use single strand fiber, but these are 1 GPS compatible. They have NOT been tested by CC 

 

Please see standard duplex SFP chart from Clear-Com https://www.clearcom.com/DownloadCenter/manuals/SFP_Chart/SFP_Chart_for_Clear-Com_Products.pdf

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.