Connecting LQ to Riedel via 4W RJ-45
How to connect your LQ to a Riedel system via 4-Wire.
Instructions
Confirm LAN 1 on the LQ is properly connected to your network
Locate a raw piece of CAT-6 cable or prepare to cut one.
We will need to have a special pinout to properly connect the systems together
Build one end of the cable with the T-568B standard as shown below for the Clear-Com LQ
For the Riedel side we will need a special order, the pin assignments are as follows.
Pin 1 - N/A
Pin 2 - N/A
Pin 3 - N/A
Pin 4 - blue
Pin 5 - white/blue
Pin 6 - N/A
Pin 7 - white/brown
Pin 8 - brown
Connect standard T-568B end to the Clear-Com LQ
Connect the custom end made in step 5 to the Riedel Frame
Follow Riedel procedures on how to add a new port to a key panel.
Test with the other end
Riedel 4wire pint out
LQ | Riedel |
---|---|
pin 1 n/a |
|
pin 2 n/a |
|
pin 3 audio out +(TX+) | pin 4 audio in + |
pin 4 audio in (RX+) | pin 7 audio out + |
pin 5 audio (RX-) | pin 8 audio out - |
pin 6 audio out (TX-) | pin 5 audio in - |
pin 7 n/a |
|
pin 8 n/a |
|
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!