/
IP Products: Can I power an LQ interface on both LAN 1 and LAN 2 RJ45 connectors?

IP Products: Can I power an LQ interface on both LAN 1 and LAN 2 RJ45 connectors?

Apr 06, 2019

The LQ-2 chnl units can only receive power from the LAN1/PoE connector only.
When using PoE the LQ-2W2 supplies approximately 70 mA of power to the 2-wire interface (~1 beltpack).
They can also be locally powered by supplied PSU.
The LQ-2W2 supplies approximately 150 mA of power to the 2-wire interface (~5 beltpacks)
when used with the supplied PSU.
















If you are powering more than two devices from one PoE switch, please consult the power output of the PoE
switch, as you may reach the limits of its power capacity with more than two boxes.
If this happens, the device(s) will show a persistent flashing green light, and not move beyond the Clear-Com
splash screen. This indicates that the device is continually booting and needs more power than the PoE switch
or network is providing. In this case, consider using the supplied sleeve-locking power connector cable to power
the device.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.