IP-LQ: How does LQ-SIP intergrate with the Eclipse matrix at v9.1
- Can a panel intercom key be configured to automatically answer an incoming call?
- The LQ will auto-answer an incoming SIP call this will be directly signaled (using off-hook tally) on an intercom panel or additional digits can be collected for the caller to further direct his own call to allow for DDI operation using the IN-ward DTMF function
- Is it possible to assign a panel intercom key to work in the same way on a Freespeak II belt pack (providing the Delta frame is hosting the Antenna)?
- Yes, it should work as above
- Is it possible to assign a SIP channel to the Helixnet?
The LQ can operate as aSIP gateway for Helixnet. in this mode use the LQ-CCM to control the SIP incoming/ outgoing calls.
- I understand it will now possible to communicate between Helixnet and Delta (Panels) over IP, is this correct?
- Yes, the LQ can connect to a Helixnet unit and also via IVC ports to a DELTA
- The LQ ports and LQ-IVC ports can be placed into a Helixnet channel to allow all ports to talk together
- Note when a LQ is connected to a Helixnet all SIP management is done via the LQ CCM
- You can connect another LQ unit directly to the Delta frame and allow panels on the Delta frame to dial out via SIP
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.