IP Products: What port options / baud rate settings are available on the LQ-4W2 interface?

4-Wire Ports

These are analog balanced line level input and output signals on a single RJ-45 connector.

4W Port Label
- Clicking on a blue label header will allow you to change the name of the port.
- Enter the new name and either press the <ENTER> key or click the blue check mark to apply changes.
4W Port Input/Output Gain
- -12 to +12 dB

Network Quality	Transmit Audio Bitrate	Transmit Audio Bandwidth	Transmit Packet Size	Receive Jitter (min - max)	Receive Unit Latency

Network Quality	Transmit Audio Bitrate	Transmit Audio Bandwidth	Transmit Packet Size	Receive Jitter (min - max)	Receive Unit Latency
Very Low	16 Kbps	12 kHz	60 ms	60 - 200 ms	80 - 220 ms
Low	32 Kbps	12 kHz	40 ms	40 - 100 ms	60 - 120 ms
Balanced	48 Kbps	12 kHz	20 ms	20 - 60 ms	40 - 80 ms
High	64 Kbps	12 kHz	10 ms	5 - 60 ms	25 - 80 ms
Very High	128 Kbps	20 kHz	5 ms	3 - 60 ms	23 - 80 ms
Custom	12 - 128 Kbps	12 / 20 kHz	5 - 60 ms	All Above 100 - 500 ms 200 - 1000 ms	+20 ms to the above depending on selected Custom Receive Jitter value

Note: LQ-4W2 devices are not Matrix +3 compatible (solution dated Nov 2015)

Solution Finder