/
IP Products: Can I put an LQ port into more than one channel group?

IP Products: Can I put an LQ port into more than one channel group?

Apr 06, 2019

LQ interfaces can be setup to allow a port to be assigned to only one channel group or setup to provide multi-channel
support. See screenshot from CCM web browser below for location of this setting:

 













Multi-Channel support: Enabled/Disabled. Enable this option to use the audio source in more than one Channel.
You can assign one port to many Channels. There is no limit on the amount of Channels a port can be assigned to, but the
rules for device resource usage apply. When the unit is reaching the limits of its capacity, the user interface stops you from
assigning more ports.
When multi- channel support is activated the port icon will show the number of channels the enabled port is assigned to. 














When do I use multi-Channel ports?
An example of when to use multi-Channel ports might be if you have a program feed or stage announce that should
be heard by several teams or groups.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.