/
IP-LQ: Is it possible to send the same audio from one LQ to multiple channels?

IP-LQ: Is it possible to send the same audio from one LQ to multiple channels?

Apr 06, 2019
Translate page

Question:
“I plan to use Port 1 on LQ#1 , running as 12KHz Tx to feed 2x other Rx LQs. There will be one LQ in location #1 and the other in location #2. They are all connected over the company WAN.
Is is possible to multicast to two different channels from 1 port?”
Answer:
Yes, this is possible with Multi Channel Support Enabled on the TX port (Ports>Port Settings in the web-based configuration tool (CCM)).
Normally when using LQ you place ports into the same channel. This provides a standard conference (3 way conversation) between all ports in the same channel.Once a port is placed in a channel it cannot be used in another channel.

Multi Channel Support allows you to put one port into different channels. This way the the two remote locations do not talk to each other but hear the same audio (like a fixed group set up in EHX).
Setup
Link LQ#1 , LQ#2 and  LQ#3 up as per normal
LQ#1 port 1 has Multi Channel Support enabled. Note: if port 1 was already assigned to a channel, it will be removed from that channel when this option is enabled.
For channel 1  assign LQ#1 port 1 + LQ#2 port X (LQ#2 is in placed in remote location #1)
For channel 2  assign LQ#1 port 1 + LQ#3 port Y (LQ#3 is in placed in remote location #2)

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.