How do I make an RJ45 to Male and female XLR cable adapter?

Owned by Rom Rosenblum (Unlicensed)
Last updated: Dec 07, 2023 by Stevan Dupree
1 min read

Instructions

Wiring an RJ45 adapter to 4wire XLR adapter

  1. Cut a CAT5 patch cord in half (this will make two adapter cables)
  2. Use the BLUE and Green pairs (Blue and Blue/White and the Green/Green/White wires) 
  3. Connect them to the Male and Female XLR pins 2 and 3 as shown
  4. For an Eclipse MVX Matrix port, the Blue pair is output from the port and the Green pair is input to the port.
  5. For Base Stations or Matrix Panels, it's the opposite.

**This "to matrix" perspective cable assembly is now available from Clear-Com P/N CAB-RJ45-PGM-SA 




CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.