/
RTS Adam 6-Pin Pin-Out

RTS Adam 6-Pin Pin-Out

Note: This pin-out solution was created by a Clear-Com Applications Engineer from a previous commissioning. Please refer to Clear-Com’s official manual and confirm the pin-out for the third-party device before proceeding.

Connecting a Clearcom analog port to an Adam analog port is very simple. Just connect a straight RJ11 or RJ12 between the 2 ports and the input and output sides will line up correctly, since Clearcom and Adam use the opposite pinouts. The RJ12 will sit in the middle 6 pins of the Clearcom RJ45 port.

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.