HelixNet Shielded CAT Cable to 3-Pin XLR

Owned by Justin Emge
Last updated: May 15, 2023 by ernie addow

Note: This pin-out solution was created by a Clear-Com Applications Engineer from a previous commissioning. Please refer to Clear-Com’s official manual and confirm the pin-out for the third-party device before proceeding.

HelixNet CAT cable pinout for a 3pin XLR connector

 

When connecting shielded Category cable to an 3pin XLR connector, use the following pinout.

Make sure to  not short the XLR casing to pin1.

 

 

Shielded CAT cable has a drain-

Drawback is most CAT cable is solid conductor not stranded-

You'll have to search for stranded if it has to be portable.

For in-wall or any installation then solid would be fine -

 

see also https://clear-com.atlassian.net/wiki/spaces/SF/pages/158723949

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.