XLR5 Headset to V-Panel Auxilliary Audio (HS2 - DB25)

Owned by Jason Fernandes
Last updated: May 19, 2023 by ernie addow
1 min read

Here is the correct wiring for XLR5 to Auxiliary audio (DB25):

XLR5

DB25

1 – Mic Screen

14 – HS2 Mic -ve

2 – Mic Input

1 – HS2 Mic +ve

Mic Shield

5 – 0V

3 – Headphone Return

15 – HS2 Left GND

16 – HS2 Right GND

4 – Left HP Output

2 – HS2 Left

HSL Shield

18 – 0V

5 – Right HP Output

3 – HS2 Right

HSR Shield

19 – 0V

 

 

Note: This pin-out solution was created by a Clear-Com Applications Engineer from a previous commissioning. Please refer to Clear-Com’s official manual and confirm the pin-out for the third-party device before proceeding.

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.