/
BA-1 Termination Load

BA-1 Termination Load

As we know, a party line 2wire circuit requires a termination load.  This solution provides a schematic of that circuit with an XLR connector to plug into the line to add the termination.  But the user should be sure to only add this if there is no termination on that circuit, otherwise there will be a double termination and that will make it impossible to null and drag down the volume of the channel.

In the real world if you don’t have a proper Clear-Com power supply… just a 30vDC PSU and want to use it for comms.  The BA-1 would supply the termination circuit for the system.

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.