Telephone Interfacing Solutions for Intercom
Search Telephony Solutions
Connecting telephone systems to intercom is an age-old requirement which is going through important changes driven by industry evolution. Interfacing POTS telephone lines with your Clear-Com Eclipse-HX system can be done with SIP-enabled LQ systems as well as third-party SIP-to-POTS and analog-to-POTS solutions.
Below please find instructions to configure LQ-SIP with Eclipse as well as information on integrating several third-party solutions. Many of these solutions are also be relevant for our wireless and Partyline intercom solutions as well.
How To Configure LQ-SIP:
Step by Step instructions for:
SIP: How do I dial out from a V-Panel using a SIP interface?
How do I dial into an Eclipse party line from a phone line?
SIP FAQ’s:
- What does the Domain field setting in the LQ SIP mean?
- How to set up the Clear-Com Gateway unit for SIP Dialing
- Can a panel intercom key be configured to automatically answer an incoming call?
- Is it possible to assign a SIP channel to the Helixnet?
- Are you able to communicate between Helixnet and Delta (panels) over IP?
- How do I configure a key panel to record a SIP telephone conversation?
- LQ is registered to a SIP server but cannot dial out and shows not acceptable connection
- How to Dial into a Microsoft Teams Conference from LQ or Eclipse