• APPROVED

    • Can I use fiber to copper media converters with IP Antennas?

    Owned by Juan A. Sanchez, created
    Last updated: Jul 10, 2024
    1 min read

    FS II IP antennas use AES67 traffic/protocol and therefore ptp is critical. We don’t recommend using media converters because they may add latency which could affect ptp. Please use the guide below to see the requirements for an AES67 network. If you must use media converters for a temporary setup, try using media converters which do not have a switch chip. There are multiple manufacturers making simple “dumb” media converters. These devices will only convert electrical to optical signals, and viceversa, without adding any switching latency.

     

    AES67 Requirements and Recommendations Guide:

     

    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.