How can I make an adaptor from a 4 pin to a 5 pin headset?
Pin 1 is mic ground (-)Pin 2 is mic hot (+)Pin 3 is ear low (-)Pin 4 is ear hot (+) (left)Pin 5 is used on a 5-pin, binaural headset for the 2nd (right) channel (+)
When making an adaptor from Clear-Com to RTS, leave pin 5 floating, in the case of a single ear headset, but do not short pins 4 and 5 to get the 2nd earcup the same audio that is on pin 4 to the first earcup. This will cause havoc in the amplifier and distort the entire PL channel. Use V-Pak for Clear-Com 600 series BPs, or open the RTS BP325 and set the listen for MONO.
The Clear-Com headsets ship standard with a 4 pin female XLR and RTS ships with a standard 5 pin male, so ,make your adaptors accordingly.RTS BP-325 STEREO Headset Connectorpin #UseThe Microphone Input is unbalanced, making
the "mic signal low" actually signal ground. The circuit design supports a balanced condition by cutting a trace on the PCB but should only be used with headsets that have balanced wiring. 1mic signal lowShield/Low2mic signal high 3ear signal low 4ear signal left 5ear signal right
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!