Spaces
Apps
Templates
Create
Solution Finder
Overview
Apps
Workflow Report
Shortcuts
Clear-Com Main Website
Contact Clear-Com
How-to articles
Troubleshooting articles
Pages
Show all pages
Agent-IC & Station-IC Solutions
AoIP (Audio over IP) - Requirements, Recommendations and Solutions
Broaman & ProGrid Solutions
Encore Partyline Solutions
Headset Solutions
HelixNet Solutions
How-to articles
LQ Solutions
Matrix: Eclipse EHX and ECS Solutions
Misc. Solutions
Pin-Outs
Service and Support Questions
Telephone Interfacing Solutions for Intercom
Troubleshooting articles
Various Clear-Com Calculators
Wireless Solutions (FSII/DX/Edge/Equip)
•
BAT80 Lithium Ion Battery Safety Data Sheet
•
Can I set Wireless Beltpack ports on 2 different E-IPA cards in HX matrix
•
FSII IP transceiver troubleshooting tip
•
How do you I get to the FSII Edge beltpack's menu from the Authentication Failed or Unable to register screens?
•
Wireless: What are the specifications for the DX210 base station antenna?
•
What PTP values do I need to get good RF roaming between IPT antennas
•
Frequency Coordination and FCC Regulations - FS Edge
•
Wireless: Does the new Freespeak II splitter II support both single mode and multi mode fiber connections?
•
How to Know If FS Edge Transceivers On Same Channel Are Too Close To Each Other
•
Alternating The Same Channels on FS Edge System - Can You Use The Same Two Channels Between Transceivers?
•
Wireless: How do I know if a FSII (E1) antenna / transceiver is receiving dect sync?
•
What is the range on the DX100?
•
DX Lithium-Ion Batteries
•
Wireless: I have two new BP210 wireless beltpacks and can hear but can not talk.
•
DX340 loud beep on beltpacks
•
Does the new BP340 beltpack work with the MB300 basestation
•
Wireless: Where can I buy Tempest Spare Parts?
•
Wireless: When I remove my Freespeak II beltpack from the AC60 charger the beltpack powers up on it's own?
•
Wireless: FS II beltpack display readout while in AC60 charging bay
•
Wireless: How to calculate the antenna cable length compensation value when using FSII-SPL splitter
•
Wireless: Can I upgrade a FreeSpeak/Cellcom basestation into a FSII-base station
•
Wireless: Cellcom/ Freespeak v2.0 upgrade and SIMM change
•
Wireless: Freespeak II beltpack display icons
•
Wireless: What are the PTX-3/PRC-2 frequency bands currently offered?
•
How do I mix E1 transceivers and IPT's on the same frame?
•
Wireless: Freespeak II base2 4-wire audio ports
•
FSII Edge Transceivers reporting region error
•
Recording Intercom Audio on FSII Base/ Base II Station's 4Wire Ports
•
Wireless: What is The Model # For The Single CellCom/Freespeak Beltpack Charger Unit?
•
Can I use the FSII SPL splitter via CWDM mux
•
Wireless: Tempest beltpacks hearing echo when connected to RTS Adam frame
•
FSII-BASEII主机SFP 光模块选择
•
CALL signal on a FSII Base II doesn't show on a muted LISTEN Key Set
•
Creating a CALL-ON-TALK on a FSII Base PL Channel
•
Why do FreeSpeak ITPs require higher PTP tolerance for DECT RF systems
•
FSII BP not able to latch to another BP
•
What is the life span and replacement procedure for CellCom/FreeSpeak basestation and Pico batteries
•
General guidelines of CWDM :
•
FS Edge Speaker Mode Not Working
•
Arcadia Central Station & FS Edge Basestation Recovery
•
FSII-BASE-II 4-Wire (4W) to RTS CRONUS 4-Wire (4W)
•
FS Edge Transceiver - Supplemental Guide for EHX
•
Does Clear-Com offer a re-banding service for FSII systems (FreeSpeak)
•
Wireless: How much current is available on the 2-wire IC ports on the FSII baseII?
•
Wireless: FSII BP BAT60 battery not reading correctly, powering up BP or not charging
•
Wireless: How do I tell the date code on a FSII BP battery BAT60
•
Maintenance of Lithium-Ion Batteries (BAT41, BAT50, BAT60, BAT80)
•
BP410 settings
•
WH301 headset settings
•
WH340 headset settings
•
WH210 Settings
•
FSII and Edge standalone site survey mode
•
WH410 headset settings
•
How do I put the FreeSpeak Edge BP into RF scan mode
•
FCC ID information
•
Wireless: 4-wire Matrix intercom pinouts for the DX200 Wireless System
•
Wireless: 4-wire pinouts incorrect in CellCom 10 version 1.5.7 manual
•
Wireless: 4-wire Matrix intercom pinouts for the Pro850 Wireless System
•
Wireless: Can I limit the menu access of Freespeak II beltpack users?
•
Wireless: FS II configuration editor screen basic functions
•
Wireless: What is "Shared Mode" in Tempest 2.0 Systems?
•
Wireless: "Network Number" and "Lockout Key" in Tempest 2400 systems, and how to set them.
•
Wireless: AC50 / BAT50 supports which wireless products?
•
Wireless: Active Channel Relay Feature with Tempest ver 2.10.01
•
Wireless: ANT20-6 and ANT20-30 - can't find them in the pricing literature
•
Wireless: Antenna passive gain reference spec (dBi)
•
Wireless: Antenna positioning tips for multiple remote transceivers / antennas
•
Wireless: Antenna tips for Tempest 900 and 2400 base stations
•
Wireless: Are both channels of the DX210 available on it's 2-wire connections to connect to an RTS, or do you have to make a Y cable to get both channels on one XLR?
•
Wireless: Are Drake PD2202 beltpacks are compatible with latest version of FreeSpeak-20 base stations?
•
Wireless: Are Freespeak II / Cellcom frequencies affected by the FCC AWS-3 auction 97?
•
Wireless: Are multiple instances of TDesk software supported on single network?
•
Wireless: Are Tempest Beltpacks and Remote Transceivers considered waterproof?
•
Wireless: Are the BP410 / WH410 compatible with DX200 / DX300 series products?
•
Wireless: Are the DX410 base station 2W ports terminated / unterminated?
•
Wireless: Are the transmit power settings on the HME850 wireless system adjustable?
•
Wireless: Are the Vega PL-2 and Clear-Com RCV-2 VHF wireless IFB receivers the same thing?
•
Wireless: Are there any functional limitations on Tempest Beltpacks in Shared mode?
•
Wireless: Are there any limitations as to how long a FSII beltpack can stay on a FSII transceiver antenna?
•
Wireless: Aux IN/Program Volume Setting on Tempest 3.00
•
Wireless: Battery contacts for WTR-670 and 680 Beltpacks
•
Wireless: Beeping is heard in base station headset and SELECT lights are blinking.
•
Wireless: Beltstation Menu Lock Feature Tempest ver2.10
•
Wireless: Beyer DT-280 headsets with condenser mics and Tempest
•
Wireless: Beyer DT-280 MkII headset with incorrect accessory cable won't work with Tempest beltpack
•
Wireless: BP210 / WH210 programming "Special Settings"
•
Wireless: BP210 with HS4-3 or CC-95 connecting to MD-XLR
•
Wireless: BP300/WH300 power lights do not turn green and I heard “out of range” from ear piece.
•
Wireless: Broken Antennas on HM Electronics BP850 beltpacs
•
Wireless: Can a Freespeak II Beltpack activate a page override function to an Eclipse V-Series panel?
•
Wireless: Can a PRC-2 replace a Clear-Com/Vega RCV-2 IFB receiver?
•
Wireless: Can a pre 2.0 Tempest system be upgraded to 2.0 functionality?
•
Wireless: Can a Tempest Base (900 or 2400) support more than one remote transceiver?
•
Wireless: Can a Tempest Beltpack supply phantom power to a wired electrec microphone?
•
Wireless: Can a Tempest CP-242 beltpack with v2.10 firmware operate on a base with v3.0 or higher firmware?
•
Wireless: Can a Vega U2020 wireless mic be rebanded to operate below 700Mhz?
•
Wireless: Can I access FSII beltpack firmware, serial # and DECT Band info from a BP?
•
Wireless: Can I activate OTA registration mode from a Freespeak II beltpack?
•
Wireless: Can I adjust the headset mic sensitivity on the WBS-670/680 beltpack?
•
Wireless: Can I adjust the sidetone level on the WBS-670 / 680 system?
•
Wireless: Can I assign default audio settings on CellCom beltpacks to individual users?
•
Wireless: Can I change the Tempest base station operating mode via the front panel Menu / Enter buttons?
•
Wireless: Can I change the UPX-10 IFB Tx to connect to RTS or Balanced Inputs?
•
Wireless: Can I combine DX210 antennas with other non 2.4 GHz antenna systems?
•
Wireless: Can I combine FSII 1.9 and 2.4GHz transceiver on the same base station?
•
Wireless: Can I combine Normal, Shared and Split modes in a Tempest 3.0 roaming group?
•
Wireless: Can I configure a FS II Beltpack to be an IFB talent receiver?
•
Wireless: Can I connect 2-wire or 4-wire intercom systems to a DX100 base station?
•
Wireless: Can I connect a CellCom base station directly to an Eclipse Matrix?
•
Wireless: Can I connect a DX200 or DX210 base station to a Telex AudioCom power supply or main station?
•
Wireless: Can I connect a DX-300 system directly to a MS-702 Partyline main station?
•
Wireless: Can I connect a PTX-3 IFB Transmitter directly to a Matrix +3 or Eclipse port output?
•
Wireless: Can I connect a TW-47 directly to a Tempest Base Station in Master Mode?
•
Wireless: Can I connect an Clear-com / HME DX-121 system to a computer sound card?
•
Wireless: Can I connect more than two channels of 2-wire IC to a CellCom basestation?
•
Wireless: Can I create multiple remote antenna zones with the WBS-670/680?
•
Wireless: Can I directly power an RS-601 BP from a DX200 base station 2-wire interface?
•
Wireless: Can I disable / password protect the Tempest Beltpack Menus?
•
Wireless: Can I disable either Channel A or B on a WTR-680 beltpack?
•
Wireless: Can I disable the "Out of Range" alarm on a Tempest beltpack?
•
Wireless: Can I disable the ISO function on an individual PRO850 beltpack?
•
Wireless: Can I Enable/Disable SA, WTA and Ch. A or B on the WTR-680 BP?
•
Wireless: Can I extend / remote the antennas on the DX-210 base station?
•
Wireless: Can I extend the antennas from my WBS-670 / 680 base station?
•
Wireless: Can I get a replacement battery sled hook for my WTR-670 beltpack?
•
Wireless: Can I hot swap FS II transceiver antennas on a PD2203 antenna splitter?
•
Wireless: Can I import old CellCom map configurations into Freespeak II Config Editor?
•
Wireless: Can I initiate a "Call on Talk" function on Tempest beltpacks?
•
Wireless: Can I interface a DX 300ES to a CS-222 party-line base station 2-wire channel?
•
Wireless: Can I interface a DX-121 system directly to an Eclipse Matrix frame port?
•
Wireless: Can I interface an MS-232 party-line main station to a Telex BTR-800 wireless base station?
•
Wireless: Can I interface the DX-121 directly to an Encore PL system?
•
Wireless: Can I legally use the WBS-670 G9 band on a Cruise ship at sea?
•
Wireless: Can I link a WBS-670 wireless intercom to a Production Intercom MS200 base station?
•
Wireless: Can I link a WBS-680 base station with a Tempest 2400 2 channel base station?
•
Wireless: Can I link two DX210 basestations to together and roam between them?
•
Wireless: Can I lock out accidental page changes on the CellCom Beltpack?
•
Wireless: Can I lock the CellCom base station front panel CH A / CH B / Program functions?
•
Wireless: Can I mix CellCom and Freespeak transceivers with Freespeak II transceivers on a Freespeak II system?
•
Wireless: Can I modify the WBS-680 auxiliary input so that it remains internally in the base station?
•
Wireless: Can I operate a CellCom/Freespeak base station on a different subnet from the host PC?
•
Wireless: Can I pair a Tempest 4 channel beltpack with a 2 channel base station?
•
Wireless: Can I perform a CellCom/Freespeak site survey with just a CEL-TA transceiver and CEL-BP?
•
Wireless: Can I power one or two RS-601 beltpacks directly from a Tempest 2400 base station?
•
Wireless: Can I power the Tempest Base Station via an external DC input?
•
Wireless: Can I program any talk key functionality with FSII beltpacks when connecting to a single antenna in Site Survey Mode?
•
Wireless: Can I program configurations offline with Tempest / TDesk software?
•
Wireless: Can I program Tempest beltpacks settings from the base station?
•
Wireless: Can I register a CEL-BP to a CellCom base station via the front panel menus?
•
Wireless: Can I register more than 4 BPs to a DX300 base
•
Wireless: Can I regress the app firmware on a CellCom Mark II beltpack?
•
Wireless: Can I remap the Stage, Call, Enter buttons on a Tempest CP-242 beltpack?
•
Wireless: Can I remote out DX-210 base station antennas 120 feet (40m) out from the base?
•
Wireless: Can I remote Tempest 2400 antennas on the Remote transceiver via coaxial cable?
•
Wireless: Can I remote the WBS basestation AN-680 antenna via coaxial cable?
•
Wireless: Can I remotely control multiple Tempest basestations on different subnets?
•
Wireless: Can I remotely locate WBS antennas 500 feet from the base station?
•
Wireless: Can I reuse my PD2203 CEL-SP with a Freespeak II system?
•
Wireless: Can I route the aux in to the aux out on the Tempest 2400 base station?
•
Wireless: Can I run TDesk software V1.501 on a MAC PC?
•
Wireless: Can I run Tempest T-Desk from a flash drive or CD?
•
Wireless: Can I select certain Wi-Fi channels for Tempest 2400 to hop on?
•
Wireless: Can I set / disable talk key latching from a Freespeak II beltpack directly from it's menus?
•
Wireless: Can I set a subnet mask and gateway for a CellCom Basestation IP address?
•
Wireless: Can I setup a Tempest base station in a rack and successfully remote the antennas to the top of the rack?
•
Wireless: Can I turn off the FS II Beltpack display dim / off settings?
•
Wireless: Can I update the PD2203 splitter firmware via OTA or USB on a FS II base station system?
•
Wireless: Can I upgrade a v1.00 Tempest wireless system to v3.00 directly?
•
Wireless: Can I upgrade FreespeakII base2 with the current FSII base firmware?
•
Wireless: Can I upgrade multiple FS II beltpacks / transceiver antennas via USB?
•
Wireless: Can I use a 4 channel Tempest beltpack with the Tempest MasterBelt?
•
Wireless: Can I use a 4-Channel Tempest Beltpack in "Single Channel" mode?
•
Wireless: Can I use a HF4-3 headset with a WTR-670 bodypack?
•
Wireless: Can I use a standard CAT-5 patch cable to connect a DX210 base to an Adam frame?
•
Wireless: Can I use a Telex ALP-450 directional antenna on the WBS-670 / 680 Base station?
•
Wireless: Can I use a WTR-670 beltpack with a WBS-680 base station?
•
Wireless: Can I use accu-sync or roaming on 3.0 and 2.1 Tempest bases mixed together?
•
Wireless: Can I use an I-Pod player to bring in balanced audio to the Program Input of a WBS-680 basestation?
•
Wireless: Can I use an CEL-TA antenna PSU with the new Freespeak II TCVR-19 transceiver antenna?
•
Wireless: Can I use consectutive Groups / Channels on WBS-670 / 680 systems?
•
Wireless: Can I use contact closure to induce a call signal onto a PL channel?
•
Wireless: Can I use more than 1 DX100 base station in the same location?
•
Wireless: Can I use more than 4 WTR-670 beltpacks on a WBS-670 base station?
•
Wireless: Can I use multiple CCT-RTs across an ethernet LAN / switch?
•
Wireless: Can I use my PRC-2 receiver with either a PTX-3 or PTX-2 transmitter?
•
Wireless: Can I use other 900 MHz wireless mics / IFB with Tempest 900?
•
Wireless: Can I use TDesk with the USB cable or only Ethernet CAT-5?
•
Wireless: Can I use Tempest 900 and Tempest 2400 Co-located together?
•
Wireless: Can I use Tempest 2400 with both locally mounted antennas and a CCT-RT remote transceiver / antenna ?
•
Wireless: Can I use the SG-100 sync dongle or the SG-120 sync generator on Tempest 900 base stations?
•
Wireless: Can I use the WBS-670 G9 band in the USA?
•
Wireless: Can I use TW-47 interface with a Freespeak II system to activate a 2-way radio?
•
Wireless: Can I use two CellCom bases together using the same map / System ID # on the same network?
•
Wireless: Can more than 2 WBS-680 base stations be linked together?
•
Wireless: Can Tempest 900 and 900 MHz Mesh radios coexist together in the same operating band?
•
Wireless: Can Tempest support linked ISO, Stage Announce functionality?
•
Wireless: Can the CellCom toolkit V2.0.4 be installed on a Windows7 PC
•
Wireless: Can the DX210 system coexist with other 2.4GHz wireless products and WiFi?
•
Wireless: Can the Freespeak II Configuration Editor create a new blank map?
•
Wireless: Can the FSII-Splitter support CAT-5 and Fiber connections via dip switch settings?
•
Wireless: Can the HME 800 system support more than 4 beltpacks on 1 base station?
•
Wireless: Can the PRC-2 receiver support mono and stereo headphones?
•
Wireless: Can the program level coming into the base through the aux port be controlled individually by each beltpac?
•
Wireless: Can the RW800 Base Station connect to a Matrix 4-wire port?
•
Wireless: Can the Tempest Wireless Beltpack be configured as an Wireless "IFB" Beltpack?
•
Wireless: Can the WBS-670 / 680 2-wire interface supply PL power to wired Beltpacks?
•
Wireless: Can two or more Freespeak II systems coexist in the same RF space?
•
Wireless: Can you recommend a mounting clamp for the Tempest CCT-RT remote antenna?
•
Wireless: Can't access the CellCom / Freespeak diagnostic logs from the base station
•
Wireless: Can't Latch a Freespeak II beltpack party-line key
•
Wireless: Can't program CellCom beltpacks 11 - 20 using CellCom config editor GUI
•
Wireless: CCT-RT remote transceiver not working properly with CM-244 base station
•
Wireless: CEL-BP RPN antenna conversion chart
•
Wireless: CEL-TA Transceivers don't power up when connected via a CEL-SP splitter to a CellCom base station
•
Wireless: CellCom 2.0.3 release only requires passcode for 20 beltpack option
•
Wireless: CellCom 4-wire port is causing feedback on my Matrix user panel
•
Wireless: CellCom / Freespeak beltpack firmware file versions
•
Wireless: CellCom base antenna screen shows antenna, but no BPs connect to it
•
Wireless: CellCom base station firmware updates to older metal front panel units
•
Wireless: CellCom Beltpack Battery Alarm Menu Selections
•
Wireless: CellCom Beltpack rechargeable NiMH AA batteries recommended
•
Wireless: CellCom CEL-TA transceiver installation information
•
Wireless: CellCom config editor 2.0.3 on page change mute functionality
•
Wireless: Changing the Tempest Beltpack from Normal to Shared mode
•
Wireless: Changing the WTR-670 Beltpack Group / Channel Frequency programming
•
Wireless: Communications can't be routed between Freespeak and Eclipse Pico
•
Wireless: Compatability with Clear-Com / RTS wired and Tempest Wireless intercoms
•
Wireless: Configuring a WBS-670 system with a PTX-3 IFB transmitter and PRC-2 receivers
•
Wireless: dB gain / loss chart for UHF wireless systems
•
Wireless: Do I have to reset the Freespeak II base station if the antenna cable lengths are changed?
•
Wireless: Do I have to use an ethercon RJ45 connector on the Freespeak II transceiver antenna?
•
Wireless: Do I need to locally power the new FSII CAT-5/Fiber Splitter?
•
Wireless: Do Tempest Beltpacks support both dynamic and electrec headsets?
•
Wireless: Do the WBS-670/680 systems headset connectors support both dynamic and electret mics?
•
Wireless: Do you have a part number for the interface to connect a DX121 to the base station CS-702 ?
•
Wireless: Does Clear-Com make a 4x or 8x RF combiner that supports the PTX-3 antenna output?
•
Wireless: Does Clear-Com offer amplified antennas for the WBS-670/680 system?
•
Wireless: Does Clear-Com/HME sell XLR to DIN headset adapters for use with standard XLR headsets?
•
Wireless: Does linking the base stations automatically prevent them from interfering with each other?
•
Wireless: Does Program / Aux In on the DX210 base send the audio to all BP210 beltpacks?
•
Wireless: Does Program input on Tempest base stations work in all modes?
•
Wireless: Does sidetone track volume on a Freespeak II beltpack?
•
Wireless: Does split mode on a Tempest 2400 / 900 base station provide more than one shared slot?
•
Wireless: Does Tempest 900 use 2x TX transmission technology and dual antennas?
•
Wireless: Does Tempest Codeloader firmware updater support Windows 7 and Vista 64 bit PC platforms?
•
Wireless: Does Tempest support DHCP connections on the Basestation?
•
Wireless: Does the 2 channel Tempest base station provide redundant 2Tx transmission capability?
•
Wireless: Does the AN-722T antenna length have to be set for a specific frequency?
•
Wireless: Does the BH800 beltpack support dynamic/electret headsets?
•
Wireless: Does the DX410 base station support 2w / 4W bridging?
Show all pages
Solution Finder
restrictions.empty
Wireless Solutions (FSII/DX/Edge/Equip)
Created by
Justin Emge
Last updated:
Aug 02, 2022
Loading views data...
Search All Wireless Solutions
Search
*This search also includes wireless IFB older wireless products no longer sold by Clear-Com.
For Agent-IC, please follow this link.
FreeSpeak II Solutions
FreeSpeak Edge Solutions
Equip Solutions
DX Series Solutions
Recently Updated Solutions for Wireless
Recently Added Solutions for All Wireless Products
{"serverDuration": 21, "requestCorrelationId": "f171de9c9a3f8ffb"}