CCI-22 (2/4 wire convertor) Pin-Out
The CCI-22 interfaces are connected to the matrix frame through the two RJ-45 connectors on the IMF-3 or IMF-102 rear-panel assembly to which CCI-22 is connected. For connection to a matrix frame refer to the “Installation in Interface Frame” on page 2-1. For internal jumper settings and adjustments refer to
“Adjustments” on page 2-8.
The “user” side of the CCI-22 for each channel is on a pair of DB-9M connectors on the rear of the interface frame. Figure 2 shows the pinout of either one of these connectors. Both DB-9Ms are paralleled such that both party-line channels are available on each connector. It is possible to wire one DB-9
connector as channel #1, the second DB-9M as channel #2, or bring both channels out either DB connector separately or create a TW type party-line connection.
MULTIPLE CLEAR-COM BELTPACK CHANNELS FROM
ONE POWER SUPPLY
A single two-output power supply can provide power for more than two CCI-22 party-line channels. In this case the power supply provides power for each party-line, but each CCI-22 channel provides the termination for each party-line. Many Clear-Com power supplies have a switch to enable or disable the termination circuits from each of its outputs. If using such a supply:
Disable the terminations by using the switch.
Connect the PS-702 output to all of the CCI-22 channels to be powered using the standard three connections in the XLR connector.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!