Eclipse EHX CPU Backplane

By Justin Emge
2 min

Note: This pin-out solution was created by a Clear-Com Applications Engineer from a previous commissioning. Please refer to Clear-Com’s official manual and confirm the pin-out for the third-party device before proceeding.

 

EHX Serial Connection - RS232 (DB-9F)

Alarm I/O (DB-9F)

 

GPO (General Purpose Output) - DB-25M

 

GPI (General Purpose Input) - DB-25F

GPI - Opto-Isolated Mode

On CPU Card, fit jumper J1 across pins 1 and 2

 

GPI - Non-Isolated Mode

On CPU Card, fit jumper J1 across pins 2 and 3

 

LAN1 and LAN2 (RJ45 Ethernet)

 

For more information, download the manual below.

 

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.