CC-250/6 Stereo Wiring
The supplier has wired incomming CC-250s two different ways.
If the A4F XLR is wired Then wire the A6F this way
Pin 1 shield Pin 1 (-) Shield
Pin 2 Yellow & Green Pin 2 (+) Yellow & Green
Pin 3 Orange & Red Pin 3 (-) Orange
Pin 4 Blue & Brown Pin 4 (+) Brown
Pin 5 (+) Blue
Pin 6 (-) Red
But if the A4F XLR is wired Wire the A6F This way
Pin 1 (-) Shield & Green Pin 1 (-) Shield & Green
Pin 2 (+) Yellow Pin 2 (+) Yellow
Pin 3 (-) Orange & Red Pin 3 (-) Orange
Pin 4 (-) Blue & Brown Pin 4(+) Brown
Pin 5 (+) blue
Pin 6 (-) Red
Beltpack Circuit
Pin 1 Mic Lo
Pin 2 Mic Hi
Pin 3 CMic Hi (no conn.)
Pin 4 Common Gnd
Pin 5 30 Volt in
Pin 6 Channel "A" intercom Line
Pin 7 Channel "B" intercom Line
Pin 8 Headphone Common
Pin 9 Channel "A" Headphone Hi
Pin 10 Channel "B" Headphone Hi
RS-623 Bottom Bezel
XJ7-3 pin Female XLR
XP8- 3 pin Male XLR
XP3-6 pin Male XLR
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!