• APPROVED

    • Arcadia: How do I save and restore settings on a Arcadia base station?

    Owned by ernie addow
    Last updated: Jul 11, 2024
    1 min read

    Using Arcadia R3.0
    To save or restore the software settings:
    Using the CCM , go to the top right handle corner select save or restore

     

    Save : This will save the Arcadia configuration file and save a xxx.cca file

     

     

    Restore : This will recall a saved xxx.cca file from your PC.

    you can select to bring back either network IP settings and or Wireless system OTA ID

    If you are setting using a spare Arcadia unit as a full backup unit for your main system.

    Then enable BOTH options IP addresses and Wirelless system OTA number

    This will allow both Helixnet beltpacks and FreeSpesk beltpacks to re-connect without having to re-register them to them to the bakcup Arcadia unit.



    CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

    This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

    The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.