/
Arcadia / FSE-BASE cannot configure AES67

Arcadia / FSE-BASE cannot configure AES67

Question: My AES67 network configuration is inoperable or displays “initializing” after an upgrade.
IP address is 255’s and MAC is filled with 0s and I cannot change these.
Resetting the unit to Default does not help

Answer: In rare instances when upgrading from version 1, the devices internal AES67 module comes back up inoperable. The AES67 module will in the CCM either report “initializing” and/or show invalid IP/MAC addresses.

Workaround: Upgrade the unit again.
This will initiate re-write of the initial configuration of the AES67 module.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.