Arcadia : Different types of Arcadia basestation resets
Your Arcadia can be reset to default settings either from the front panel menus or from the Core
Configuration Manager (CCM).
When you use a pin reset on the front of the Arcadia, the device power cycles (reboots).
Resetting to Default from the CCM
In the CCM, navigate to Status > Overview > Host Device.
Select Reset to Default.
From the confirmation dialog box, click Reset to Default.
The device will reset to factory defaults and reboot.
When resetting to default from the CCM, network settings are not reset, and the password is also not reset.
Resetting to Default from the Front panel
From the front panel navigate to Admin > Reset> Reset to Default
Press the 4th Rotary to start the reset process
After reset to default, you will need to re-discover your IP transceivers. HelixNet user stations will
revert to default configuration.
When you reset the Base , as well as system setup details (channels and roles), network details (IP addresses) are also reset.
After resetting you must add transceivers again. HelixNet connections revert to default config