/
IP Concert: How do I constuct a cable from the Concert server Delta 1010 to the Eclipse frame port?

IP Concert: How do I constuct a cable from the Concert server Delta 1010 to the Eclipse frame port?

Apr 06, 2019

Question:  For users connecting a Concert Server via a Delta 1010 audio interface back to a Matrix Frame (Matrix +3 or Eclipse Matrix) how do I make the wired connection? 
Answer:  The wired connections are made from the unused Matrix +3 or Eclipse frame MVX ports out to the Delta 1010 interface TRS 1/4 jacks.  The Delta 1010 has ¼ TRS jacks (labeled IN and OUT) for each channel (1 thru 8) so to make a cable with an RJ45 connector, use a CAT-5 patch cable and cut off one of the RJ45 connectors.  Then wire up two ¼ TRS phone plugs to this end using the wiring scheme show below (blue pair for Eclipse frame output via tip and ring) (green pair for Eclipse frame input via tip and ring).  If a shielded CAT-5 cable is available then use the drain wire and connect it to the shield connector on the TRS phone plugs.
















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.