IP Concert: What peripheral hardware do I need to program a preloaded iron systems Concert Server?

IP Concert: What peripheral hardware do I need to program a preloaded iron systems Concert Server?

Question:  I purchased a preloaded Iron Systems Concert Server for our Eclipse system.  What peripheral hardware will I need  to connect to the server to program the Concert Server program? 

Answer:  The Simple answer is none: you can browse directly to the Concert EMS from your laptop connect the Server to a Ethernet switch and connect you laptop to the same Ethernet switch. The Server should have a sticker or a data pack indicating the IP address of the server. Set your laptop to have a similar IP address as the server. Open any web browser on your laptop .Type in the IP address of the concert server in the search bar of your browser . Type in the user name / password details (default = admin / admin) 


Or you can connect the following computer hardware directly to the Concert Server software: 

  • Computer keyboard

  • Computer mouse

  • SVGA Monitor

  • Ethernet switch for connection to Eclipse Frame / IVC-32 card


The diagram below shows the rear panel connections to the Iron Systems Concert Server.






























CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.