EHX FreeSpeak Antennas Power: What the maximum cable length for antennas being powered by the splitter?
SYSTEM TYPE
PLEASE NOTE: This solution is for E1 (EQue or FSII Base) connections ONLY. Please see our AoIP Guide for PoE requirements with the FSII or FS Edge IP Transceivers.
As of V10, the numbers have been revised. If the antenna is being powered by the splitter, the maximum cable length between the splitter and the antenna is 100m. It is recommended to power the antenna(s) locally.
See attached for more information on cable gauge.
The amount of current a FSII antenna (E1) uses FSII Antenna 110mA when DC locally powered @24V with 5 BPs connected
24V DC (nominal) 120mA - 15V DC (minimal) 240mA
The amount of current a FSII splitter uses Splitter 180mA when DC locally powered @24V (not including Antennas)
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.