/
Matrix: Eclipse FOR-22 to 2-way radio generic diagram

Matrix: Eclipse FOR-22 to 2-way radio generic diagram

Question: What is the proper way to connect 2-way radios to an Eclipse Median frame using a FOR-22 interface card?  Will I need to create a custom cable from the FOR-22 out to the 2-way radios?


Answer:  The FOR-22 rear card DB-9 connector on the Eclipse frame will tie into the 2-way radio accessory connector. The best way to determine the audio input / output and PTT activation for a particular model radio is to contact the radio manufacturer service group for the accessory pin outs or to take a unused accessory speaker/mic cable and manually determine the pinouts on the accessory connector. 

image-20250325-142547.png



Note:  The Orange cables are standard CAT-5 cabling from the Eclipse MVX-A16 card to the rear interface card of the FOR-22, the other cables shown are custom cables from the FOR-22 rear panel DB-9 connector out to the 2-way radio accessory connector. 

see this page as well

https://clear-com.atlassian.net/wiki/spaces/SF/pages/469041419

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.