• APPROVED

    • Agent IC: Linking to LQ (CCM) Configuration

    Owned by Dennis Low
    Last updated: Jun 03, 2024
    3 min read

     

    LQ Setup via CCM

    IP Network Configuration:

    1. Navigate: Device > Network > LAN / WAN Connectivity:

      1.  Set Mode to Static

        1. See Network Setting (IP) - (page 69) LQ 4.2 User Guide

      2.    Enter Internal IP Address: <Dedicated IP address for the LQ within your VLAN> e.g 192.168.1.8

      3.    Enter Sub Mask: 255.255.255.0

      4.    Enter Gateway : <IP gateway of your VLAN> e.g 192.168.1.1

      5.    Primary DNS: (Optional)

      6.    Secondary DNS: (Optional)

    2. Navigate: Device > Network >External Connectivity: See Getting an external IP address - (page 72) LQ 4.2 User Guide

      1.     Enter External IP Address: <IP address assigned by your Internet Service Provider>

      2.     Domain name: (Optional)