Search Telephony Solutions
Connecting telephone systems to intercom is an age-old requirement which is going through important changes driven by industry evolution. Interfacing POTS telephone lines with your Clear-Com Eclipse-HX system can be done with SIP-enabled LQ systems as well as third-party SIP-to-POTS and analog-to-POTS solutions.
Below please find instructions to configure LQ-SIP with Eclipse as well as information on integrating several third-party solutions. Many of these solutions are also be relevant for our wireless and Partyline intercom solutions as well.
SIP & POTS Solutions:
- 1) Third-Party Telephone Hybrids (POTS, SIP, Other)
- 2) Gateways
- 3) On-Site SIP Server
- 4) Cloud SIP Server
- Matrix: Using a Viking CPC Generator (Calling Party Control) with Tel-14
- Matrix: TEL-14 will not auto hangup - Set TEL-14 disconnect/hangup tone
- LQ-SIP: how much bandwidth does a SIP line take
- LQ-SIP: Does the LQ support Digest authentication protocol
How To Configure LQ-SIP:
Step by Step instructions for:
- Program LQ-SIP and Clear-Com Eclipse
- Configure SIP in the EHX Software
- Program the LQ-SIP via CCM
- SIP Connectivity
- Program LQ-SIP Standalone
- SIP and the Internet
- How to use SIP calls
- Interfacing LQ-SIP to an Eclipse frame.
SIP FAQ’s:
- What does the Domain field setting in the LQ SIP mean?
- How to set up the Clear-Com Gateway unit for SIP Dialing
- Can a panel intercom key be configured to automatically answer an incoming call?
- Is it possible to assign a SIP channel to the Helixnet?
- Are you able to communicate between Helixnet and Delta (panels) over IP?
- How do I configure a key panel to record a SIP telephone conversation?
- LQ is registered to a SIP server but cannot dial out and shows not acceptable connection
- How to Dial into a Microsoft Teams Conference from LQ-SIP or Eclipse