Program LQ-SIP and Clear-Com Eclipse

Example setup for LQ-SIP

  1. In the Eclipse Software, the matrix IVC port is setup as LQ SIP.

  2. Create an IVC port in the LQ CCM to connect back to the Eclipse matrix IVC card.

  3. The LQ unit is setup as x. 2003 on the SIP server.

  4. A SIP phone is setup as x. 2005 on the SIP server.

  5. In the LQ CCM assign the LQ SIP port (x.2003) and the LQ IVC port into a Direct Channel.

  6. From the V-series panel select the HYB#1 key and dial '2005' (speed dial or keypad). The IVC card will send the dialed digits to the LQ unit which will dial x. 2005. Once the call is established audio will pass from x. 2005 to the LQ to the IVC to the panel.

Click image to enlarge/minimize 


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.