Dante: Finding E-Dante IP address
Troubleshooting: Find E-Dante IP address
In most cases the E-Dante64-HX card will be discovered by Dante Controller and be available for configuration in the controller’s Routing page.
Cards that have been ‘misplaced’ and are not visible in the routing screen are those that have been configured with a static IP address that falls outside the subnet which the PC hosting the controller is on.
To remedy this you need to:
· Find the card IP address in the Dante controller
· Make sure both devices, the PC hosting the controller and the E-Dante64-HX card are on the same subnet
· Access the card and reallocate IP as required. If the E-Dante card is on a different subnet to the PC, the card will not be visible in the routing screen, but will be available under Device Info where it will show with a red highlight. Note: Link local is a special case. A PC hosting the Dante Controller cannot see an E-Dante card that has an IP addressin the Link local range unless it is set to Link local itself.
See Find E-Dante IP PDF (attached) for more detailed information.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.