/
Partyline: MT 701 - Audio not passing through from A to B
Partyline: MT 701 - Audio not passing through from A to B
- Dennis Low
- ernie addow
Owned by Dennis Low
Last updated: Nov 02, 2023
Issue: After connecting PL system A and PL system B into the MT 701, audio not passing through from A to B. (Calls and Power works)
Solution: On the main board - Check that the jumpers are inserted onto PIN 1 and not on PIN 2 or in between.
MT 701 Main Board
To find out the function of the jumpers, go to HERE.
, multiple selections available,
Related content
Partyline: RS-603 not passing audio past 1st belt pack, or through the loop through connector.
Partyline: RS-603 not passing audio past 1st belt pack, or through the loop through connector.
More like this
Partyline: Why will my RS-703 beltpack only make/receive a CALL signal on one channel
Partyline: Why will my RS-703 beltpack only make/receive a CALL signal on one channel
More like this
Partyline: How do I wire a audio program input to RS-702 beltpack?
Partyline: How do I wire a audio program input to RS-702 beltpack?
More like this
Partyline: How to have PGM appear on Beltpack CH.A but not on MS-702 Mainstation speaker
Partyline: How to have PGM appear on Beltpack CH.A but not on MS-702 Mainstation speaker
More like this
Partyline: How does the RS703 / RS603 call signalling work when connected to a MS702
Partyline: How does the RS703 / RS603 call signalling work when connected to a MS702
More like this
IP-Voice: How do I set up VoICE so I get Call Signal between two Party-line Systems linked over IP
IP-Voice: How do I set up VoICE so I get Call Signal between two Party-line Systems linked over IP
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.