/
Partyline: How do I wire an AB-120 for STADIUM MODE (for a PA announcer) when using a comms matrix system
Partyline: How do I wire an AB-120 for STADIUM MODE (for a PA announcer) when using a comms matrix system
When you want to use the AB-120 for a stadium or arena announcer's mic and comms, you can use the TALKBACK port to go to the main mixing board, so when the talent pushes the TalkBack button, the mic will be routed to the arena/stadium's audio console. But when not pressed, the IFB in could come from the comms matrix and the MIC OUT could go to that same port's input (It is actually a low LINE LEVEL source).Attached are pinouts for the RJ-45 to Male and Female XLRs from the perspective of both a Matrix Port and also from the perspective of a base station device, depending on what you are attaching the AB-120 and your comms to. The other attachment shows where to put these XLR connectors. NOTE: The 6pin Headset connector MUST BE AN "S" type 6 pin connector. Either the Neutrix NC6MXs http://www.markertek.com/product/nc6mxs-bag/neutrik-nc6mxs-bag-male-6-pin-xlr-cable-connector-black-nickel or the Switchcraft, 6pin original standard:https://www.bhphotovideo.com/bnh/controller/homeA=details&O=&Q=&ap=y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&gclid=CjwKCAjw8IXMBRB8EiwAg9fgMJ46tLsZfTNQ4rgRERny7uW3k2wy22je__RJCQ502-ruHRA3ouBQ_hoCltAQAvD_BwE&is=REG&m=Y&sku=929717
, multiple selections available,
Related content
Partyline: AB-100 / AB-120 6 Pin Out to a Sennheiser HMD 26-II-600-8 Dynamic Broadcast Headset
Partyline: AB-100 / AB-120 6 Pin Out to a Sennheiser HMD 26-II-600-8 Dynamic Broadcast Headset
More like this
Partyline: How do I place an AB-120 into announcer mode?
Partyline: How do I place an AB-120 into announcer mode?
More like this
Partyline: AB-120 headset pin out
Partyline: AB-120 headset pin out
More like this
Partyline: How to wire a CC-95 Single-Muff headset to a 6pin XLR Headset connector?
Partyline: How to wire a CC-95 Single-Muff headset to a 6pin XLR Headset connector?
More like this
Partyline: Describe the AB-120 internal dipswitches and jumpers
Partyline: Describe the AB-120 internal dipswitches and jumpers
More like this
Partyline: How to configuring AB-120 for headsets with electret mics
Partyline: How to configuring AB-120 for headsets with electret mics
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.