/
Partyline: SMQ-1 Que-Com Single Ear Headset/Beltpack Combination

Partyline: SMQ-1 Que-Com Single Ear Headset/Beltpack Combination

The SMQ-1 is the current single muff Que-Com version.Technical Specifications: Amplifier Type
Solid state, IC amplifiers, current-limited with reverse-polarity and short-circuit protection
Signal-to-noise Ratio
65 dB
Distortion
<0.5% THD @ 1 kHz
MIC Pre-amp Frequency Response
200 Hz - 10 kHz, contoured for enhanced vocal intelligibility
Microphone Type
Dynamic, noise-rejecting
Headphone Frequency Response
200 Hz - 12 kHz
Sound Pressure Level
110 dB SPL max
Controls & Connector
Mic on/off switch and headphone volume control; cable terminates in female XLR 3-pin connector
Power Requirements
Talk: 10 mA average
Voltage Range: 12-32 VDC
Headset Weight
8.5 oz (0.24 kg)

Beltpack Dimensions
1" H x 3.5" W x 1.5" D (25 x 89 x 38 mm)

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.