Partyline: How to wire a CC-95 Single-Muff headset to a 6pin XLR Headset connector?
- Administrator
- KARI EYTHORSSON
Customer would like to know how to wire a CC-95 Single-Muff headset to a RS-522 or RS-622 beltpack which has 6pin XLR headset connector for Split-Ear operation where each intercom channel feeds each ear.
Background
RS-522, 622 or 623 wired beltpack, TR-523 and AB-100 or 120 commentator consoles allow you to monitor Channels A or B in separate ears (Split-Ear) via a 6 pin XLR Headset connector.The 6 Pin Headset connectors is wired
4 pin headset connection pinout:
1 microphone ground
2 microphone hot
3 speaker ground
4 speaker hot
6 pin headset connection pinout:
1 microphone ground
2 microphone hot
3 speaker 1 ground
4 speaker 1 hot
5 speaker 2 hot
6 speaker 2 ground
Since your headset is a single muff, you cannot bridge both Channel-A and B (Connect to a common amplifier) as you will connect CH A to B and have two output amps looking at each other.. You don't want that...
In summary, if you wish to use a single muff headset with the 2 channel bi-aural 522, 622 or 623, you must decide which channel to monitor .... A or B.
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.