RS-601 RS-602 RS-603 beltpack will not program
The beltpack will not accept user programming. I have turned on Channel exclusive to chA on my RS-603 beltpack. I now want to change this to channel B and it does not happen.
The solution to this is to perform a factory reset.
Hold down the Set-up button until "P" appears. Release the Set-up buttonHold down the CALL button and press the Set-up button again. Now release the Set-up button whilst continuing to hold CALL
This will default your beltpack. You can now continue to program the beltpack, you are unlikely to have any further programming issues.
The solution to this is to perform a factory reset.
Hold down the Set-up button until "P" appears. Release the Set-up buttonHold down the CALL button and press the Set-up button again. Now release the Set-up button whilst continuing to hold CALL
This will default your beltpack. You can now continue to program the beltpack, you are unlikely to have any further programming issues.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.