Partyline: What functions do the jumpers inside the MT-701 support?
The MT-701 has a couple of reference jumpers for XLR pin 1 or 2
Without power on both sides, the MT-701 cannot pass call signal, however the audio will work ...Pin 2 reference is only used in special situations therefore always use pin 1.The use of pin 2, though rarely used, is so the reference is within the “twisted pair”, therefore using the twist to help null the reference signal in extremely long cable runs in very large systems
Without power on both sides, the MT-701 cannot pass call signal, however the audio will work ...Pin 2 reference is only used in special situations therefore always use pin 1.The use of pin 2, though rarely used, is so the reference is within the “twisted pair”, therefore using the twist to help null the reference signal in extremely long cable runs in very large systems
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.