/
Partyline: How to build an Analog PL channel A/B toggle switch (WP-2)

Partyline: How to build an Analog PL channel A/B toggle switch (WP-2)

By Administrator
Apr 06, 2019
We recommend a Clear-Com WP-2 for this sort of thing.  It’s notjust a passive switch, but remember that the only difference between Channel Aand B is the audio on pin 3 (pin1=common, pin2=30vDC, pin3-= channel audio+).Attached is the wiring scheme for our WP-2 switched wallplate as well of a picture of an unwired WP-2, so you can see the cap that werecommend between pin 1 and the XLR casing.
  File Modified

JPEG File 4020_WP-2 pic to show cap.jpg WP-2 pic to show cap.jpg

Apr 06, 2019 by Administrator

PDF File 5689_WP-2_Wiring[1].pdf WP-2_Wiring[1].pdf

Apr 06, 2019 by Administrator

JPEG File WP-2 pic to show cap.jpg WP-2 pic to show cap.jpg

Apr 06, 2019 by Administrator

PDF File WP-2_Wiring[1].pdf WP-2_Wiring[1].pdf

Apr 06, 2019 by Administrator

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.