How To Connect Equip to 4-Wire Directly - First Release
The original version of Equip (that you can hang on a wall) comes equipped with two analog audio connections. Both connections are unbalanced, and depending on what you want to connect Equip to or the length of the cable, you can either keep it as unbalanced or purchase some third-party devices to make the signal balanced audio.
In the following example, we are using three third-party devices to change the signal from balanced to unbalanced (4-wire/LQ to Equip) and unbalanced to balanced (Equip to 4-wire/LQ). The parts needed to make this happen includes:
1 x RDL ST-UBA2
2 x RDL TX-1A
The attached drawing shows how it was connected with the individual colors representing audio send or receive.
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.